Author Topic: Adjusting NHD‐C0220BiZ‐FSW‐FBW‐3V3M contrast  (Read 1959 times)


  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Adjusting NHD‐C0220BiZ‐FSW‐FBW‐3V3M contrast
« on: April 25, 2016, 08:40:49 AM »

Is there a way to accentuate the contrast on NHD‐C0220BiZ‐FSW‐FBW‐3V3M character LCD?



  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 10
    • View Profile
Re: Adjusting NHD‐C0220BiZ‐FSW‐FBW‐3V3M contrast
« Reply #1 on: April 25, 2016, 03:38:21 PM »

You can bring out the contrast on this display by using the following commands:
Follower Control
Power/ICON Control/Contrast Set with Contrast Set

To modify these registers you do need to use the function set command, During this commands set the IS2 bit Low, and the IS1 bit High.
This will give you access to instruction table one, where you would be able to control the software of the display.


NHD-C0220BiZ Sometimes Ignoring "Clear Display" Command

Started by dstoverBoard Character LCDs

Replies: 2
Views: 3758
Last post March 27, 2014, 05:41:27 PM
by Michael_L
NHD-C0220Biz-FSW adds character 0x11 at begining of line

Started by whAtlGaBoard Character LCDs

Replies: 3
Views: 1443
Last post July 11, 2016, 08:20:40 AM
by Saurabh_B
NHD-C0220BiZ- Series 2x20 Display mounting on PCB

Started by m.sankarBoard Character LCDs

Replies: 3
Views: 4351
Last post March 24, 2014, 08:08:00 AM
by Michael_L
NHD-C0220Biz-FS(RGB)-FBW-3VM Pins backwards on manufacture document?

Started by jamesarm97Board Character LCDs

Replies: 1
Views: 9
Last post Today at 08:06:26 AM
by Saurabh_B
Driving backlight for NHD-C0220BiZ-FSRGB-FBW-3VM

Started by mhBoard Character LCDs

Replies: 5
Views: 4010
Last post April 30, 2014, 04:15:00 PM
by mh