Author Topic: NHD-5.0-800480TF-ATXL-CTP with LPC1788  (Read 2038 times)

sai

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
NHD-5.0-800480TF-ATXL-CTP with LPC1788
« on: May 27, 2016, 04:11:19 AM »
i am new to TFT display, i want to use NHD-5.0-800480TF-ATXL-CTP display in one of my application with LPC1788 controller. LPC1788 is an ARM Cortex-M3 based microcontroller, it has 512 KB flash, 64 KB SRAM and in built LCD controller with Selectable display resolution (up to 1024 X 768 pixels) and 24-bit true-color mode.
1. Are these specifications enough to handle the NHD-5.0-800480TF-ATXL-CTP display or not?
2. how to calculate Frame Buffer size for 24 bpp?

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP with LPC1788
« Reply #1 on: June 03, 2016, 09:29:40 AM »
If the TFT interface on that microcontroller can support up to 1024x768 pixels, then using our 800x480 pixel TFT with it will be fine.
To calculate frame buffer:
800 (horizontal pixels) x 480 (vertical pixels) x 3 (24bpp [3 bytes per pixel]) = 1,152,000 bytes.

sai

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP with LPC1788
« Reply #2 on: July 05, 2016, 09:07:23 AM »
Hi micheal,
 Thanks for the reply,
as per calculation frame buffer size is 1.15MB so i decided to go with external SDRAM interface using External Memory Controller(EMC) in Controller.
Is there any PCB guidelines for TFT data signals lines strip impedance in the PCB?? generally what could be the Impedance value for the Data line to interface with TFT display???

sai

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP with LPC1788
« Reply #3 on: August 17, 2016, 02:51:01 AM »
could anyone please suggest LED driver circuit for NHD-5.0-800480TF-ATXL-CTP display, currenly i am using FAN5333B IC for LED Back light driving circuit but when i connected display LED+ voltage drops from 28V to 15V so Display back light is not enabling. i have attached my circuit image.

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP with LPC1788
« Reply #4 on: August 17, 2016, 07:39:33 AM »
Morning,

There must be a mistake in your schematic, for your reference please see the attachment.





 

NHD‐3.5‐320240MF‐ATXL#‐T‐1 Touch Signal

Started by jmasamotoBoard TFTs

Replies: 1
Views: 2095
Last post February 05, 2016, 08:05:40 AM
by Paul_B
NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 1933
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3385
Last post September 25, 2015, 03:09:24 PM
by Paul_B
NHD-3.5-320240MF-ATXL#-CTP-1 Ft5x06 Linux device tree

Started by rajarajan.rBoard TFTs

Replies: 1
Views: 2412
Last post July 05, 2016, 01:21:43 PM
by UART
help! NHD-4.3-480272EF-ATXL#-T touch panel rotates 90 degrees

Started by knightsunBoard TFTs

Replies: 3
Views: 1204
Last post September 26, 2016, 11:58:01 PM
by knightsun