Author Topic: NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM Potting  (Read 5239 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM Potting
« on: June 22, 2016, 12:13:26 PM »

I'm planning to use the NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM for an underwater device that would require potting in epoxy resin.
Is that device suited for that ?
Thanks for the infos.

Sebastien Kister
Ariane's Line


  • Administrator
  • Hero Member
  • *****
  • Posts: 384
  • Karma: 10
    • View Profile
Re: NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM Potting
« Reply #1 on: June 22, 2016, 04:51:17 PM »

It is possible to achieve your goal to pot this display with resin. However you have to be extremely careful. This display isn't completely sealed and there are chances for some of the resin to seep in behind the display and cause some blotching in the backlight.

Depending on where the resin might seep in, this could cause some areas to get brighter while others get darker.

I would recommend using a waterproof enclosure.


NHD-C0220BiZ-FSW-FBW-3V3M stucking at "39"

Started by amitjagtapBoard Character LCDs

Replies: 1
Views: 1172
Last post March 18, 2019, 05:35:11 AM
by amitjagtap
NHD-C0220BiZ Sometimes Ignoring "Clear Display" Command

Started by dstoverBoard Character LCDs

Replies: 2
Views: 8538
Last post March 27, 2014, 05:41:27 PM
by Michael_L
NHD-C0220BiZ-FSW-FBW-3V3M NAKs all odd numberd ASCII characters

Started by majorninthBoard Character LCDs

Replies: 7
Views: 9217
Last post May 28, 2015, 04:51:31 PM
by Michael_L
NHD-C0220Biz-FSW adds character 0x11 at begining of line

Started by whAtlGaBoard Character LCDs

Replies: 3
Views: 5674
Last post July 11, 2016, 08:20:40 AM
by Saurabh_B
NHD-C0220BiZ- Series 2x20 Display mounting on PCB

Started by m.sankarBoard Character LCDs

Replies: 3
Views: 8129
Last post March 24, 2014, 08:08:00 AM
by Michael_L