Author Topic: 2.4" TFT LCD Brightness Control  (Read 3023 times)

adnan.ashraf

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
2.4" TFT LCD Brightness Control
« on: April 01, 2014, 05:23:24 AM »
Hello,

I am using NHD-2.4-240320SF-CTXI#-FT1 LCD which has built-in ILI9340 controller. I connected the LCD's backlight LED pins directly to a power source and they are working good (internally biased). I want to control the LCD's brightness through the ILI9340 controller's backlight control registers but am unable to change the brightness level using those registers.

I want to know, can the LCD's backlight be controlled through ILI9340 registers or do I need to control the brightness externally through some circuit.

Thanks!

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: 2.4" TFT LCD Brightness Control
« Reply #1 on: April 01, 2014, 08:24:47 AM »
The backlight is independent of the TFT controller.  Therefore the latter would be correct; you would need to control the brightness externally.

 

7.0" TFTs with capacitive Touch and 8080 interface availability?

Started by gdoraisaBoard TFTs

Replies: 2
Views: 1222
Last post Today at 01:25:07 AM
by tolikkk
16-bit controller Board (SSD1963) for 5.7" QVGA TFT display

Started by erpsBoard Evaluation Tools

Replies: 1
Views: 2959
Last post September 17, 2015, 02:25:46 PM
by Saurabh_B
Program snippet for writing to Newhaven Display 7.0" TFT

Started by ssd1963Board TFTs

Replies: 1
Views: 2240
Last post October 30, 2015, 12:24:44 PM
by Michael_L
Question on the SSD1351 oled 1.5" display

Started by josephchrzempiecBoard OLEDs

Replies: 0
Views: 2762
Last post July 19, 2015, 02:48:45 PM
by josephchrzempiec
MOVED: 2.4" LCD module viewing angle

Started by Saurabh_BBoard Graphic LCDs

Replies: 0
Views: 2078
Last post January 25, 2016, 08:19:32 AM
by Saurabh_B