Author Topic: FT5306 Registers 0x80-0x89  (Read 2221 times)


  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
FT5306 Registers 0x80-0x89
« on: September 02, 2016, 09:25:58 PM »

Could someone explain to me what each of the register from 0x80 to 0x89 does? I'm trying to understand them by playing with each one to see how it changes the panel's sensitivity, but I can't tell what each does exactly. I tried setting them to the recommended values, but for some reason the touch panel sometimes randomly reads in values that aren't supposed to be there (reading in 5 touches when I'm only using one finger, etc.). Also, it reads in multiple sets of values for one single touch (which I'm guessing should be 3 in total for Put Down, Contact, then Put Up? Which one should I be using? Either one of the three?). Lastly, I tried writing into register 0x83 and 0x84, but for some reason I'm getting back the value 0x00 for both of those, while the rest of the other registers were able to write in the new values I specified. Sorry for having so many questions on one post.



FT5306 capacity touch problem

Started by SimoneBoard TFTs

Replies: 0
Views: 2313
Last post December 23, 2016, 03:31:14 AM
by Simone
FT5306 Touch Controller

Started by smallfireBoard TFTs

Replies: 3
Views: 5012
Last post December 02, 2015, 07:50:02 PM
by v8dave
Voltages and Power_Control registers with NHD-1.8-128160EF-CSXN#-F

Started by qfsasmBoard TFTs

Replies: 1
Views: 1342
Last post February 19, 2019, 11:23:11 AM
by Sergio_M