Author Topic: Current limiting resistors needed for NHD-C12864A1Z-FS(RGB)-FBW-HT1?  (Read 4342 times)


  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
The datasheet for the NHD-C12864A1Z-FS(RGB)-FBW-HT1 on page 3 shows a small circuit connected to the backlight LEDs for this display, but the text is too small to make out the details.  Can someone from NHD confirm that there are indeed current limiting resistors for this display, and that those resistors are sized appropriately for 3V3 input voltage?



  • Administrator
  • Hero Member
  • *****
  • Posts: 384
  • Karma: 10
    • View Profile
Re: Current limiting resistors needed for NHD-C12864A1Z-FS(RGB)-FBW-HT1?
« Reply #1 on: September 28, 2016, 08:36:06 AM »

There are no current limiting resistors built into this display.
The resistors on the pads have a value of 0Ω.

If you take a look at the bottom picture here:
You can see the values of R1-R3 are 0Ω.


NHD‐C12864A1Z‐FS(RGB)‐FBW‐HT1 Initialization

Started by BMohlmanBoard Graphic LCDs

Replies: 5
Views: 9982
Last post January 13, 2016, 07:44:16 AM
by Paul_B
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 14247
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD-C12864A1Z-FSRGB-FBW-HT1 boost speed (clear to black and black to clear)

Started by facotlBoard Graphic LCDs

Replies: 4
Views: 7690
Last post January 27, 2016, 10:18:45 AM
by facotl
NHD-C12864A1Z not listed in NHDev Supported Displays List

Started by JimLBoard Evaluation Tools

Replies: 1
Views: 5646
Last post April 19, 2017, 05:34:28 PM
by JimL
Recommended Temperature to Turn on LCD Heater? (NHD-C12864A1Z-FSW-FBW-HTT)

Started by charliefjohnsonBoard Graphic LCDs

Replies: 3
Views: 1992
Last post October 22, 2018, 02:50:27 PM
by Saurabh_B