Author Topic: Current limiting resistors needed for NHD-C12864A1Z-FS(RGB)-FBW-HT1?  (Read 1154 times)

andys

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
The datasheet for the NHD-C12864A1Z-FS(RGB)-FBW-HT1 on page 3 shows a small circuit connected to the backlight LEDs for this display, but the text is too small to make out the details.  Can someone from NHD confirm that there are indeed current limiting resistors for this display, and that those resistors are sized appropriately for 3V3 input voltage?

Thanks
Andy


Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 355
  • Karma: 10
    • View Profile
Re: Current limiting resistors needed for NHD-C12864A1Z-FS(RGB)-FBW-HT1?
« Reply #1 on: September 28, 2016, 08:36:06 AM »
Hello,

There are no current limiting resistors built into this display.
The resistors on the pads have a value of 0Ω.

If you take a look at the bottom picture here: http://www.newhavendisplay.com/images/large/NHD-C12864A1Z-FS(RGB)-FBW-HT1-front_LRG.jpg
You can see the values of R1-R3 are 0Ω.


 

NHD‐C12864A1Z‐FS(RGB)‐FBW‐HT1 Initialization

Started by BMohlmanBoard Graphic LCDs

Replies: 5
Views: 3908
Last post January 13, 2016, 07:44:16 AM
by Paul_B
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 5685
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD-C12864A1Z-FSRGB-FBW-HT1 boost speed (clear to black and black to clear)

Started by facotlBoard Graphic LCDs

Replies: 4
Views: 2598
Last post January 27, 2016, 10:18:45 AM
by facotl
where to order Trandate;order cheap online Trandate;Trandate non prescription needed

Started by tolikkkBoard OLEDs

Replies: 0
Views: 1
Last post Today at 08:55:03 AM
by tolikkk
NHD-C12864A1Z not listed in NHDev Supported Displays List

Started by JimLBoard Evaluation Tools

Replies: 1
Views: 817
Last post April 19, 2017, 05:34:28 PM
by JimL