Author Topic: NHDev board interface?  (Read 5103 times)

Kristofer

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
NHDev board interface?
« on: April 08, 2014, 08:30:39 AM »
Hi!

We're using the NHdev board together with NHD-2.2312832UCB3 OLED disp. We've tried to connect them with serial interface but no luck.

What interface does NHDev board use default? Is it possible to change it?
Is there a wiring diagram for between NHdev board and NHD-2.2312832UCB3?

Regards Kristofer

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHDev board interface?
« Reply #1 on: April 08, 2014, 03:45:21 PM »
The NHDev board uses the 8-bit parallel interface in 6800 mode.  It is not possible to change this.
We do not have a diagram showing the connections between the display and NHDev board, however, the NHDev board's pins (seen on page 6 of the user guide, here: http://www.newhavendisplay.com/nhdev/specs/NHDev_v2.pdf) match the names of the pins on the OLED.  (D/C on the OLED is the same as RS on the NHDev board)  As for the BS2 and BS1 pins on the OLED, BS2 should be tied HIGH and BS1 should be tied LOW.

Kristofer

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: NHDev board interface?
« Reply #2 on: April 09, 2014, 08:52:43 AM »
Thanks! It works now.

Is it possible to change the brightness or luminance with NHdev board together with NHD-2.2312832UCB3 OLED disp?

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHDev board interface?
« Reply #3 on: April 09, 2014, 10:15:50 AM »
The brightness for the OLED is adjustable through software via the Set Brightness command on the SSD1305 controller, and is therefore not adjustable on the NHDev board.

ierturk

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: NHDev board interface?
« Reply #4 on: May 15, 2014, 11:26:03 AM »
Dear Sir,

I'm trying to develop a project with STM32F103 with NHD-3.5-320240MF-ATXL-CTP. I need NHDev board PCB layout and Schematic to use as a reference. Please share them if it is possible.

Also please let me know how can I get demonstration code for NHD-3.5-320240MF-ATXL-CTP with STM32F103.

Regards,
Ibrahim

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHDev board interface?
« Reply #5 on: May 15, 2014, 12:38:00 PM »
Please email us at nhtech@newhavendisplay.com for this information.
« Last Edit: November 04, 2015, 07:57:17 AM by Michael_L »

ierturk

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: NHDev board interface?
« Reply #6 on: May 16, 2014, 07:02:43 PM »
Thanks. I'll contact via the email shortly.

Regards,
Ibrahim

 

NHD‐0420CW‐AB3 I2C Interface

Started by andersonpdBoard OLEDs

Replies: 1
Views: 2550
Last post January 23, 2015, 10:00:06 AM
by Michael_L
NHD‐0420DZW‐AY5 SPI Interface

Started by vinaykBoard OLEDs

Replies: 0
Views: 1956
Last post October 26, 2015, 05:13:10 AM
by vinayk
NHD‐3.12‐25664UMB3 3 or 4 wire interface

Started by cliffgBoard OLEDs

Replies: 1
Views: 2401
Last post February 13, 2015, 04:43:21 PM
by Michael_L
NHD‐3.5‐320240MF‐34 Controller Board

Started by mmlquinlanBoard Customer Projects

Replies: 0
Views: 1220
Last post November 08, 2016, 12:25:24 PM
by mmlquinlan
NHD‐5.0‐800480TF‐34 Controller Board Back Light (B/L Enable)

Started by MidknighTrainBoard TFTs

Replies: 11
Views: 1721
Last post September 14, 2016, 10:30:31 PM
by MidknighTrain