Author Topic: Using NHD-1.8 Displays with a FFC connector  (Read 636 times)

Mark_R

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Using NHD-1.8 Displays with a FFC connector
« on: November 14, 2016, 08:11:04 AM »
Hi,

im currently designing a PCB which will connect to several NHD-1.8 displays. I have to make the connection between the display and the PCB myself, and i don't have equipment to do hot-bar soldering. My initial plan was to use a normal FFC connector instead, but it seems that the 0.8mm pitch of the displays FFC is non standard.
Are there any FFC connectors available that are known to work with the NHD-1.8 FFC?

Thanks!

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 341
  • Karma: 10
    • View Profile
Re: Using NHD-1.8 Displays with a FFC connector
« Reply #1 on: November 14, 2016, 09:32:25 AM »
Hello Mark,

Unfortunately there are no standard ZIF / FFC connectors for the 0.8mm pitch connector, these would have to be soldered directly to the pcb.
We do offer the 1.8" TFTs with a FFC style connector, such as the NHD-1.8-128160EF-CSXN#-F

 

Backlight brightness with TFT displays (5" and 7")

Started by dsheroBoard TFTs

Replies: 3
Views: 2771
Last post July 21, 2015, 07:19:42 AM
by Michael_L
Calculation of Font Addresses Multi‐Font Displays Help!

Started by BluesboyBoard OLEDs

Replies: 6
Views: 3420
Last post September 11, 2015, 10:54:16 AM
by Saurabh_B
NHD-C12864A1Z not listed in NHDev Supported Displays List

Started by JimLBoard Evaluation Tools

Replies: 1
Views: 713
Last post April 19, 2017, 05:34:28 PM
by JimL
Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?

Started by bluemountainBoard OLEDs

Replies: 2
Views: 2059
Last post January 14, 2015, 12:19:16 PM
by bluemountain
Test mode for NHD-0420CW-xxx displays?

Started by LoyalServantBoard OLEDs

Replies: 8
Views: 2784
Last post May 06, 2016, 12:54:49 PM
by Saurabh_B