Author Topic: FT5306 capacity touch problem  (Read 675 times)

Simone

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
FT5306 capacity touch problem
« on: December 23, 2016, 03:31:14 AM »
Hi, I'm using a display with FT5306 capacity touch panel and I'm using it with Raspberry Pi, but I'm having some problems. The first time I connected the display, it worked correctly. Then I disconnected and reconnected it again and now the touch panel doesn't work. The problem is that, when the display is not touched, the interrupt pin value is 1.3V (instead of 3.3V) and this value doesn't change when the display is touched. Maybe I need to reset something? Can anyone help me?
Thanks

 

NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 1949
Last post June 16, 2016, 12:14:36 PM
by guenter
Working on NHD‐2.4‐240320SF‐CTXL#‐FTN1, have problem in initialization

Started by sli25Board TFTs

Replies: 6
Views: 3806
Last post June 04, 2015, 09:52:25 PM
by sli25
Problem in bringing up NHD‐2.4‐240320SF‐CTXL#‐FTN1 on Renesas RL78/G14

Started by sli25Board TFTs

Replies: 3
Views: 3073
Last post May 28, 2015, 02:59:03 PM
by Michael_L
problem with NHD‐2.23‐12832UCB3

Started by luisvalsecaBoard OLEDs

Replies: 1
Views: 901
Last post January 24, 2017, 02:52:53 PM
by Saurabh_B
Problem setting "function select c" register

Started by jonmon6691Board OLEDs

Replies: 3
Views: 2295
Last post May 04, 2016, 02:44:37 PM
by Saurabh_B