Author Topic: Max Voltage on NHD-0108CZ-FSW-GBW-33V3  (Read 2806 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Max Voltage on NHD-0108CZ-FSW-GBW-33V3
« on: April 23, 2014, 10:09:34 PM »
The maximum / min VDD voltage on the NHD-0108CZ-FSW-GBW-33V3 isn't specified.  Is is possible to power this display directly off a lithium ion battery (4.2V) when fully charged? If not is there another LCD that would work?  Trying to remove a power supply if possible.  What if VDD was 3.0V, would the display work?



  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: Max Voltage on NHD-0108CZ-FSW-GBW-33V3
« Reply #1 on: April 25, 2014, 09:09:14 AM »
We cannot guarantee reliable operation, nor do we test our displays, at levels higher or lower than what is shown in the spec.  However, the display will most likely operate at those levels (the backlight should not be over-driven).  You may order a sample to test it with your supply to see if it works for you if you like.  But, since you are interested in using a battery for the supply, have you looked at any of our character COG displays?  They draw less current, and can some can be used at those levels.


NHD-0420H1Z-FL-GBW-33V3 pull-ups and pull-downs in 4 bit mode

Started by richardwrightBoard Character LCDs

Replies: 3
Views: 3519
Last post December 15, 2014, 05:12:27 PM
by Michael_L
interface voltage levels for NHD-0420CW

Started by oldmakerBoard OLEDs

Replies: 3
Views: 2866
Last post February 12, 2015, 01:56:20 PM
by Paul_B
Supply voltage for KZW series OLED

Started by MustardManBoard OLEDs

Replies: 5
Views: 950
Last post August 25, 2017, 08:09:31 AM
by Saurabh_B
NHD-7.0-800480EF-20 Voltage Levels

Started by John_DaileyBoard TFTs

Replies: 2
Views: 3038
Last post April 23, 2014, 08:16:29 AM
by John_Dailey
NHD-C0216CZ-NSW-BBW-3V3 Interface Voltage

Started by NimrodBoard Character LCDs

Replies: 2
Views: 2760
Last post March 03, 2016, 07:03:02 PM
by perky