Author Topic: Testing Resistive Touch Panel  (Read 739 times)

Guenther

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
Testing Resistive Touch Panel
« on: December 22, 2016, 11:14:55 AM »
I have a NHD-2.4-240320CF-CSXN#-FT display with a resistive touch screen. I want to do a passive test of the touch screen by checking the resistance between YU,YL and XL,XR.

I connected my Ohm meter between YU and YL which shows no conductivity. Next I touch the screen and still no conductivity.

Is this the way to test a resistive touch panel?

Btw. I do have AR1021-I/SO and a TSC2003IPWR to test with as a next step.

/Guenther

Guenther

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
Re: Testing Resistive Touch Panel
« Reply #1 on: January 09, 2017, 12:14:37 PM »
If not doing a simple test with am ohm meter, is there another simple test I can do before I hook up an IC to its touch screen wires?

Thanks!
Guenther

 

NHD‐3.5‐320240MF‐ATXL#‐T‐1 Touch Signal

Started by jmasamotoBoard TFTs

Replies: 1
Views: 2105
Last post February 05, 2016, 08:05:40 AM
by Paul_B
NHD‐2.4‐240320SF‐CTXL#‐FTN1 touch-screen problem

Started by hbcelebiBoard TFTs

Replies: 5
Views: 4178
Last post December 10, 2014, 11:19:05 AM
by Michael_L
NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?

Started by dfanslerBoard TFTs

Replies: 5
Views: 886
Last post May 26, 2017, 11:10:57 AM
by Saurabh_B
7.0" TFTs with capacitive Touch and 8080 interface availability?

Started by gdoraisaBoard TFTs

Replies: 1
Views: 1220
Last post June 30, 2016, 07:54:11 AM
by Saurabh_B
NHD-4.3-480272EF-ASXN#-CTP touch controller interrupt signal

Started by Chris ElectronicsBoard TFTs

Replies: 2
Views: 2377
Last post May 20, 2016, 07:38:45 AM
by Chris Electronics