Author Topic: Unable to detect NHdev board target using J-link  (Read 2720 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Unable to detect NHdev board target using J-link
« on: February 16, 2017, 10:22:28 AM »
Hello. I am trying to re-program the NHdev board but the target is not being recognized using J-link from SEGGER. The touch screen display is working fine and I am able to see the images loaded from the SD card. I was able to successfully use the J-Link on another board (not from New Haven) with no problems. Here's the equipment I have.

  • NH Development Board w/ STM32F103RET6 ARM 32 bit Cortex-M3
  • NHD-2.4-240320CF-CTXI#-FT
  • SEGGER J-Link Base programmer

Here's a screenshot from the J-link command. You can see the version of Jlink being used.

As you can see, it cannot detect the target. I tried scanning the target using MDK Keil uVision 5 as well but same result. Any feedback would be appreciated.


NHD‐3.5‐320240MF‐34 Controller Board

Started by mmlquinlanBoard Customer Projects

Replies: 0
Views: 4845
Last post November 08, 2016, 12:25:24 PM
by mmlquinlan
NHD‐5.0‐800480TF‐34 Controller Board Back Light (B/L Enable)

Started by MidknighTrainBoard TFTs

Replies: 11
Views: 6999
Last post September 14, 2016, 10:30:31 PM
by MidknighTrain
NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?

Started by dfanslerBoard TFTs

Replies: 5
Views: 6552
Last post May 26, 2017, 11:10:57 AM
by Saurabh_B
NHD-7.0-800480EF-20 Controller Board and the backlight on a 800x480 LCD Display

Started by dfanslerBoard TFTs

Replies: 1
Views: 5772
Last post July 27, 2015, 10:08:23 AM
by Saurabh_B
16-bit controller Board (SSD1963) for 5.7" QVGA TFT display

Started by erpsBoard Evaluation Tools

Replies: 1
Views: 6971
Last post September 17, 2015, 02:25:46 PM
by Saurabh_B