Author Topic: NHD-4.3-480272EF-ATXL#-CTP how to interface this with LPC2368  (Read 4576 times)

npn

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Hello,

     I'm looking for a display 4.3 inch. I have chosen NHD-4.3-480272EF-ATXL#-CTP but my doubt is how to interface this with LPC2368?? does it has inbulit controller?? I am new to TFT displays so how to Program it?

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHD-4.3-480272EF-ATXL#-CTP how to interface this with LPC2368
« Reply #1 on: May 06, 2014, 12:02:52 PM »
We sell controller boards that can be used with our displays.  For that 4.3" TFT, you can use the NHD-4.3-480272MF-20 Controller Board (link below):

http://www.newhavendisplay.com/nhd43480272mf20-controller-board-p-2657.html

The datasheet can be downloaded by accessing that link.  We also have example code available for it here:

http://www.newhavendisplay.com/app_notes/TFT_43M.txt

cuevas1208

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Re: NHD-4.3-480272EF-ATXL#-CTP how to interface this with LPC2368
« Reply #2 on: July 16, 2015, 03:17:49 PM »
Iím very new to LCD interfacing to a micro-controller. I am using the Newhaven Display Intl NHD-4.3-480272EF-ATXL#-CTP on LPC2478-32 Developer's Kit. I am train the code similar to http://www.newhavendisplay.com/NHD_forum/index.php?topic=134.0 based on the IAR sample code but with these settings:
#define C_GLCD_REFRESH_FREQ     (50HZ)
#define C_GLCD_H_SIZE           480
#define C_GLCD_H_FRONT_PORCH    2
#define C_GLCD_H_PULSE          41
#define C_GLCD_H_BACK_PORCH     2
#define C_GLCD_V_SIZE           272
#define C_GLCD_V_FRONT_PORCH    2
#define C_GLCD_V_PULSE          10
#define C_GLCD_V_BACK_PORCH     2
I have not got my screen back light to turn on, what connections am I doing wrong? (
http://i61.tinypic.com/2ev445v.jpg )
http://www.newhavendisplay.com/specs/NHD-4.3-480272EF-ATXL-CTP.pdf
http://www.embeddedartists.com/products/kits/lpc2478_kit.php

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Re: NHD-4.3-480272EF-ATXL#-CTP how to interface this with LPC2368
« Reply #3 on: July 17, 2015, 11:45:17 AM »
Hello!

Based on the wiring diagram you provided, it would appear that you do not have the displays LED-Anode (LED+) or LED-Cathode (LED-) connected to anything.

LED+ will need to be supplied 40mA @ 19.2V

LED- will need to be connected to GND

Hope this helps!

cuevas1208

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Re: NHD-4.3-480272EF-ATXL#-CTP how to interface this with LPC2368
« Reply #4 on: July 17, 2015, 03:10:14 PM »


I connected pin#1 to GND and pin#2 to  40mA @ 19.2V from a power supply, and I still do not see the Backlight turn on.
* Do I need to connect some type of resistor in series between pin#2 and the power supply?
* What are the minimum requirement(pins) for the Blacklight to turn on?  I do not have the 6 pins from the touch screen connected do they have to be connected?

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Re: NHD-4.3-480272EF-ATXL#-CTP how to interface this with LPC2368
« Reply #5 on: July 17, 2015, 04:17:36 PM »
Hello,

You have swapped the pins, in your wiring diagram LED+ is connected to GND and LED- is connected to 40mA @ 19.2V.

LED+ will need to be supplied 40mA @ 19.2V

LED- will need to be connected to GND

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Re: NHD-4.3-480272EF-ATXL#-CTP how to interface this with LPC2368
« Reply #6 on: July 21, 2015, 11:11:32 AM »
Hello,

No code / initialization sequence is required to turn on the displays backlight. Simply applying 40mA @ 19.2V to pin 2 and Gnd to pin 1 will turn on the backlight  :)

Please verify the operation of Pins 1 & 2 with a DMM.

Hope this helps!




cuevas1208

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Re: NHD-4.3-480272EF-ATXL#-CTP how to interface this with LPC2368
« Reply #7 on: July 22, 2015, 07:54:22 AM »
Thank you for your help, it works

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Re: NHD-4.3-480272EF-ATXL#-CTP how to interface this with LPC2368
« Reply #8 on: July 22, 2015, 10:56:11 AM »
Very nice, enjoy your new TFT!  ;)

 

NHD‐3.5‐320240MF‐ATXL#‐T‐1 Touch Signal

Started by jmasamotoBoard TFTs

Replies: 1
Views: 2093
Last post February 05, 2016, 08:05:40 AM
by Paul_B
NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 1929
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?

Started by dfanslerBoard TFTs

Replies: 5
Views: 874
Last post May 26, 2017, 11:10:57 AM
by Saurabh_B
NHD‐0420CW‐AB3 I2C Interface

Started by andersonpdBoard OLEDs

Replies: 1
Views: 2628
Last post January 23, 2015, 10:00:06 AM
by Michael_L
NHD‐0420DZW‐AY5 SPI Interface

Started by vinaykBoard OLEDs

Replies: 0
Views: 2033
Last post October 26, 2015, 05:13:10 AM
by vinayk