Author Topic: Moving Cursor after Shifting Display Left or Right  (Read 3993 times)


  • Guest
Moving Cursor after Shifting Display Left or Right
« on: March 08, 2017, 04:53:41 PM »
I'm using a 4x20 character LCD display. Normally I move the cursor by adding the desired column to the offset of the desired row. However, if I've shifted the display left or right, the cursor no longer goes to the desired absolute screen, but is offset, and acts strangely when trying to move it to the edge of the desired row. What am I doing wrong? Thanks.


Blank Display on NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM

Started by SteveCBoard Character LCDs

Replies: 3
Views: 8584
Last post May 13, 2014, 12:04:36 AM
by SteveC
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 10355
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 7309
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 9
Views: 16326
Last post July 10, 2014, 08:46:06 AM
by Michael_L
NHD-0420DZW-AG5 - Display "sometimes" shows only 2 lines

Started by stylonurusBoard OLEDs

Replies: 5
Views: 9881
Last post June 18, 2014, 10:09:49 AM
by Michael_L