Author Topic: Use of Timing characteristics in the initialization code of the display  (Read 3011 times)

Shabda

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
I'm using the lcd_NHD-2.4-240320SF-CTXI-FT1 of Newhaven display and I have a doubt that why there are no delays in it's initialization code given in it's datasheet.

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
There are 2 delays in the initialization routine in the datasheet.  They are at the beginning and are required for issuing a hard reset.  Additional delays throughout the rest of the routine are not required.

 

Blank Display on NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM

Started by SteveCBoard Character LCDs

Replies: 3
Views: 4686
Last post May 13, 2014, 12:04:36 AM
by SteveC
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 5893
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3538
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 9
Views: 9232
Last post July 10, 2014, 08:46:06 AM
by Michael_L
NHD-0420DZW-AG5 - Display "sometimes" shows only 2 lines

Started by stylonurusBoard OLEDs

Replies: 5
Views: 5724
Last post June 18, 2014, 10:09:49 AM
by Michael_L