Author Topic: Use of Timing characteristics in the initialization code of the display  (Read 2943 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
I'm using the lcd_NHD-2.4-240320SF-CTXI-FT1 of Newhaven display and I have a doubt that why there are no delays in it's initialization code given in it's datasheet.


  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
There are 2 delays in the initialization routine in the datasheet.  They are at the beginning and are required for issuing a hard reset.  Additional delays throughout the rest of the routine are not required.


Blank Display on NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM

Started by SteveCBoard Character LCDs

Replies: 5
Views: 4583
Last post Today at 10:40:50 AM
by tolikkk
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 7
Views: 5723
Last post Today at 02:14:24 AM
by tolikkk
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3432
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 14
Views: 8863
Last post Today at 02:12:56 PM
by tolikkk
NHD-0420DZW-AG5 - Display "sometimes" shows only 2 lines

Started by stylonurusBoard OLEDs

Replies: 5
Views: 5597
Last post June 18, 2014, 10:09:49 AM
by Michael_L