Author Topic: NHD-C12864LZ in parallel mode initializing  (Read 547 times)

marien

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-C12864LZ in parallel mode initializing
« on: May 08, 2017, 09:02:21 AM »
Hi all,

I start to work om this NHD-C12864LZ COG display with the ST7565R mpu in 6800 series mode.
On which edge is the data captured by the display? I tried several things, but until now I see nothing on the display.
When:
- RES is 0
- R/W is 0
- E is 1
the data written to the display will then captured on the rising edge of the CS1?

 

NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 1837
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD-0420H1Z-FL-GBW-33V3 pull-ups and pull-downs in 4 bit mode

Started by richardwrightBoard Character LCDs

Replies: 3
Views: 2842
Last post December 15, 2014, 05:12:27 PM
by Michael_L
NHD0420CW-A*3 tHREE LINE MODE, MIDDLE LINE DOUBLE HEIGHT

Started by wb2dybBoard OLEDs

Replies: 3
Views: 2962
Last post July 01, 2015, 09:49:46 AM
by Paul_B
NHD-2.4-240320CF-CSXN#-F works in 18 bits(262K colors) mode

Started by charlieBoard TFTs

Replies: 3
Views: 2027
Last post March 15, 2016, 10:39:50 AM
by Saurabh_B
Text orientation not changing with Extended Entry Mode Set Register

Started by tekknojoeBoard OLEDs

Replies: 5
Views: 1259
Last post January 27, 2017, 10:13:57 AM
by jmadsenee