Author Topic: NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?  (Read 690 times)

dfansler

  • Jr. Member
  • **
  • Posts: 26
  • Karma: 0
    • View Profile
I recently purchased 3 each of the above units.  The X+,X-,Y+,Y- signals from the display are carried on the 40 pin conductor between the display and the NHD-5.0-800480TF-20 Controller Board.  There is no output of the  X+,X-,Y+,Y- signals on the NHD-5.0-800480TF-20 Controller Board.  How does one access those signals?
Kind regards,
David

dfansler

  • Jr. Member
  • **
  • Posts: 26
  • Karma: 0
    • View Profile
Ok, so I see that the -22 board has the touch screen outputs.  A suggestion - don't have the website display the -20 controller on the same page as a suggestion for the 5" resistive touch display.
David

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 338
  • Karma: 10
    • View Profile
Thanks for pointing this out, I will have our website design team take the -20 controller off the suggested links.

dfansler

  • Jr. Member
  • **
  • Posts: 26
  • Karma: 0
    • View Profile
What connector is used with the NHD-5.0-800480TF-22 Controller Board?  It appears to be a 22pin .5mm pitch.  I do not see one listed in the connectors.  Top or bottom feed?
Thanks,
David

dfansler

  • Jr. Member
  • **
  • Posts: 26
  • Karma: 0
    • View Profile
Opps - I read the .5mm as the pitch rather tha the trace width - I see the pitch is 1mm.

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 338
  • Karma: 10
    • View Profile
It is a 1mm Pitch, with a Top Contact connector.

 

NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 1832
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3197
Last post September 25, 2015, 03:09:24 PM
by Paul_B
NHD-3.5-320240MF-ATXL#-CTP-1 Ft5x06 Linux device tree

Started by rajarajan.rBoard TFTs

Replies: 1
Views: 2285
Last post July 05, 2016, 01:21:43 PM
by UART
NHD-7.0-800480EF-ATXL#-CTP Sensitivity in a high EMI environment

Started by cborlaseBoard TFTs

Replies: 0
Views: 1472
Last post February 16, 2016, 04:45:19 PM
by cborlase
MOVED: Problem with Display NHD-3.5-320240MF-ATXL#-T-1

Started by Saurabh_BBoard Graphic LCDs

Replies: 0
Views: 849
Last post July 08, 2016, 02:47:03 PM
by Saurabh_B