Author Topic: NHD-3.5-320240MF-ASXN-T touch pin mapping  (Read 1335 times)

surya14

  • Guest
NHD-3.5-320240MF-ASXN-T touch pin mapping
« on: May 18, 2017, 02:04:08 AM »
i am using NHD-3.5-320240MF-ASXN-T display with four wire resistive touch. NHD-3.5-320240MF-ASXN-T datasheet refers pins as X1,X2,Y1,Y2 while my touch screen controller (stmpe811) datasheet specifies pins as X+, X-, Y+, Y-.
Please tell me how to correctly map both.

 

NHD‐2.4‐240320SF‐CTXL#‐FTN1 touch-screen problem

Started by hbcelebiBoard TFTs

Replies: 5
Views: 7612
Last post December 10, 2014, 11:19:05 AM
by Michael_L
NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?

Started by dfanslerBoard TFTs

Replies: 5
Views: 4528
Last post May 26, 2017, 11:10:57 AM
by Saurabh_B
7.0" TFTs with capacitive Touch and 8080 interface availability?

Started by gdoraisaBoard TFTs

Replies: 1
Views: 3545
Last post June 30, 2016, 07:54:11 AM
by Saurabh_B
NHD-5.0-800480TF-ATXL#-CTP electrical noise interfering with touch

Started by Les.GrantBoard TFTs

Replies: 3
Views: 4234
Last post July 07, 2016, 02:56:01 PM
by Paul_B
Resistive/Capacitive Touch Screen - Sample Code

Started by daotaBoard TFTs

Replies: 2
Views: 2988
Last post October 14, 2018, 04:12:49 PM
by rogerlucas