Author Topic: NHD-3.5-320240MF-ASXN-T touch pin mapping  (Read 521 times)

surya14

  • Guest
NHD-3.5-320240MF-ASXN-T touch pin mapping
« on: May 18, 2017, 02:04:08 AM »
i am using NHD-3.5-320240MF-ASXN-T display with four wire resistive touch. NHD-3.5-320240MF-ASXN-T datasheet refers pins as X1,X2,Y1,Y2 while my touch screen controller (stmpe811) datasheet specifies pins as X+, X-, Y+, Y-.
Please tell me how to correctly map both.

 

NHD‐2.4‐240320SF‐CTXL#‐FTN1 touch-screen problem

Started by hbcelebiBoard TFTs

Replies: 5
Views: 4314
Last post December 10, 2014, 11:19:05 AM
by Michael_L
NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?

Started by dfanslerBoard TFTs

Replies: 5
Views: 1040
Last post May 26, 2017, 11:10:57 AM
by Saurabh_B
7.0" TFTs with capacitive Touch and 8080 interface availability?

Started by gdoraisaBoard TFTs

Replies: 1
Views: 1331
Last post June 30, 2016, 07:54:11 AM
by Saurabh_B
NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 2016
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD-5.0-800480TF-ATXL#-CTP electrical noise interfering with touch

Started by Les.GrantBoard TFTs

Replies: 3
Views: 2391
Last post July 07, 2016, 02:56:01 PM
by Paul_B