Newhaven Products > TFTs

NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?

(1/2) > >>

dfansler:
I recently purchased 3 each of the above units.  The X+,X-,Y+,Y- signals from the display are carried on the 40 pin conductor between the display and the NHD-5.0-800480TF-20 Controller Board.  There is no output of the  X+,X-,Y+,Y- signals on the NHD-5.0-800480TF-20 Controller Board.  How does one access those signals?
Kind regards,
David

dfansler:
Ok, so I see that the -22 board has the touch screen outputs.  A suggestion - don't have the website display the -20 controller on the same page as a suggestion for the 5" resistive touch display.
David

Saurabh_B:
Thanks for pointing this out, I will have our website design team take the -20 controller off the suggested links.

dfansler:
What connector is used with the NHD-5.0-800480TF-22 Controller Board?  It appears to be a 22pin .5mm pitch.  I do not see one listed in the connectors.  Top or bottom feed?
Thanks,
David

dfansler:
Opps - I read the .5mm as the pitch rather tha the trace width - I see the pitch is 1mm.

Navigation

[0] Message Index

[#] Next page

Go to full version