Author Topic: Muli-language support for NHD‐0440WH‐ATMI‐JT#  (Read 3003 times)

VitalijStepin

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Muli-language support for NHD‐0440WH‐ATMI‐JT#
« on: May 22, 2014, 05:22:52 AM »
Hello!

At the moment, 4x40 character display NHD‐0440WH‐ATMI‐JT# is being used in current applications. We use standard English fonts. Some clients wish to add multi-language support. It is necessary to display Cyrilic and Baltic characters too. Is it possible to use empty memory of the display to define new characters? It would be fine, if users can  select required language. Then the host microcontroller will write necessary fonts to memory of the display. How can I do this? What is your advice?

Best regards,
Vitalij

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: Muli-language support for NHD‐0440WH‐ATMI‐JT#
« Reply #1 on: May 22, 2014, 12:21:44 PM »
The display's available memory that can be used to define custom characters only allows up to 8 characters to be created and stored.  If you would like us to supply you with the same display with a different font table, please refer to this link for our available character LCD font tables: http://www.newhavendisplay.com/char_fonts.html

If a font table listed under the Character LCD section is of interest to you, please email us at nhtech@newhavendisplay.com to discuss this further.
« Last Edit: November 04, 2015, 07:52:58 AM by Michael_L »

haim_rozenboim

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Re: Muli-language support for NHD‐0440WH‐ATMI‐JT#
« Reply #2 on: October 30, 2016, 07:02:44 AM »
is NHD-0216HZ-FSW-FBW-33V3C nave Muli-language support ?
Do you have a list of supported languages?
Is there a similar module that Supports download all characters?
Haim

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 363
  • Karma: 10
    • View Profile
Re: Muli-language support for NHD‐0440WH‐ATMI‐JT#
« Reply #3 on: October 31, 2016, 08:24:30 AM »
All of our character LCDs can use one of the font tables that are found here: http://www.newhavendisplay.com/char_fonts.html
The controllers used for these LCD's are limited to only allow one font table used at a time.

However the controllers on our OLED displays have multiple font tables built in. Our standard character OLED has the following fonts built in: http://www.newhavendisplay.com/appnotes/fonttables/CharOLED/
You can select the font table by choosing it when using the function set command.

Our slim OLED displays also offer multiple font tables as well. You can see the offered font tables on pages 54-56 the controller datasheet: http://www.newhavendisplay.com/app_notes/US2066.pdf

 

NHDEV firmware to support NHD-2.4-240320CF-CTXI#-FT (ST7889S controller)

Started by deshayesBoard Evaluation Tools

Replies: 1
Views: 2718
Last post December 17, 2015, 09:52:29 AM
by Saurabh_B
NHDev updated support list?

Started by D_AndersonBoard Evaluation Tools

Replies: 1
Views: 1302
Last post July 18, 2016, 08:48:27 AM
by Saurabh_B
3V3 microprocessor parallel interface with 5V display (NHD-0212WH-ATMI-JT)

Started by SteBoard Character LCDs

Replies: 1
Views: 2084
Last post April 05, 2016, 08:33:04 AM
by Saurabh_B
NHDev support for NHD-C12864LZ-FSW-FBW-3V3

Started by AriBoard Evaluation Tools

Replies: 2
Views: 1175
Last post January 30, 2017, 04:23:57 AM
by Ari
NHD-10.1-1024600AF-LSXV-CTP #SUPPORT

Started by EngineersBoard TFTs

Replies: 4
Views: 666
Last post August 10, 2017, 03:45:07 PM
by Paul_B