Newhaven Products > TFTs

Using RGB666 on NHD-4.3-480272EF-ATXL#-T

(1/1)

carrasco:
Hello,

After reviewing the documentation related with the NHD-4.3-480272EF-ATXL#-T, I have not been able to find how to terminate the unused pins.
1. Is required to terminate the unused RGB pins? Ground, pull-down resistor?
2. Are the unused pins the LSB or MSB?

Thank you,
carrasco

Saurabh_B:
Hello,

You would want to ground the unused RGB pins. These would be the LSB (R0,R1, G0, G1, B0, B1)

Paul_B:
Hello carrasco,

One approach is to wire all the unused bits to a fixed value (typically zero - Ground). Please note that you do not need to utilize a pull-down resistor. 

Paul_B:
You can also wire them to the upper bits, in sequence  ;)

Navigation

[0] Message Index

Go to full version