Author Topic: 1.8V IO on NHD-2.4-240320CF-CTXI-F  (Read 2840 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
1.8V IO on NHD-2.4-240320CF-CTXI-F
« on: June 18, 2017, 01:21:51 PM »

I want to interface the NHD-2.4-240320CF-CTXI-F with an 1.8V system. The datasheet ( mentions that IOVDD can be 1.8V, but the logic IO parameters Vih, Vil, Voh and Vol all are specified in terms of VDD (which is 3.3V). Is this a typo in the datasheet (intuitively, I would expect IOVDD to set the IO logic levels, instead of VDD) or can the display in fact only interface with 3.3V logic?

Thank you!


  • Administrator
  • Hero Member
  • *****
  • Posts: 384
  • Karma: 10
    • View Profile
Re: 1.8V IO on NHD-2.4-240320CF-CTXI-F
« Reply #1 on: June 28, 2017, 11:30:55 AM »
While the controller for the display (ST7789S) Can work with a 1.8V system, the display will need 3.3V.
Because of this you CAN  use 1.8V on the IOVDD and 1.8V Logic with the data lines (DB0-15, /CS, D/C, /WR, /RD, /RES, IM0)
However you would need to apply 3.3V to the VDD for the LCD circuit. Is it possible for you to supply the +3.3V for the LCD alone?

The logic voltage should be related to the IOVDD, i will make this correction on future spec upgrades.


protecting NHD-1.8-128160EF-CTXI# from ESDs on a battery powered application

Started by tsmrndBoard TFTs

Replies: 1
Views: 387
Last post July 19, 2019, 03:37:51 PM
by gsubas
NHD-1.8-128160EF-CTXI ili9163 & SAM3s driver help needed

Started by JsaggioBoard TFTs

Replies: 0
Views: 4349
Last post February 01, 2016, 01:02:58 AM
by Jsaggio
NHD-1.8-128160EF-CTXI# problem: becomes pale after using it for some time

Started by fvdhoefBoard TFTs

Replies: 1
Views: 5575
Last post July 31, 2014, 08:55:40 AM
by Michael_L
Writing Character strings to NHD-1.8-128160EF-CTXI#

Started by JeffJwayBoard TFTs

Replies: 3
Views: 5417
Last post July 13, 2016, 09:45:21 AM
by Michael_L
NHD-7.0-800480WF-CTXI# initial problem

Started by cwparkBoard TFTs

Replies: 0
Views: 3810
Last post December 02, 2014, 06:22:04 AM
by cwpark