Author Topic: Smooth Scrolling on NHD-1.69-160128UGC3 with SEPS525  (Read 383 times)

pixel

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Smooth Scrolling on NHD-1.69-160128UGC3 with SEPS525
« on: July 06, 2017, 08:35:54 PM »
I'm working with the NHD-1.69-160128UGC3, and was hoping there may be some examples available on how to use the screen saver functionality for smooth scrolling of text and images on the display.  I would like to provide a continuing stream of text, and allow new lines to smoothly scroll on from the bottom of the screen.

I'm using the Adafruit GFX library for NHD_SEPS525 running on an Arduino Uno. 

I've been able to achieve a weak scrolling affect by re-writing all of the text on the display, but the overall affect is poor with noticed refresh lag.

Thanks!

 

NHD-1.69-160128UGC3 how avoid tearing artefacts ?

Started by emax73Board OLEDs

Replies: 2
Views: 2150
Last post March 11, 2016, 12:50:09 PM
by emax73
Current consumption NHD - 1.69 - 128160ASC3 and NHD -1.69- 160128UGC3

Started by NickBoard OLEDs

Replies: 1
Views: 1849
Last post June 16, 2016, 08:04:03 AM
by Saurabh_B
Connector hole size in NHD-1.69-160128UGC3

Started by VRTBoard OLEDs

Replies: 2
Views: 734
Last post November 18, 2016, 06:33:59 AM
by VRT
Using NHD-1.69-160128UGC3 CPU and PS signal

Started by bluedog54Board OLEDs

Replies: 1
Views: 2103
Last post April 22, 2015, 11:44:34 AM
by Michael_L
NHD-1.69-160128UGC3 with STM32F0

Started by ekinyBoard OLEDs

Replies: 1
Views: 1732
Last post March 02, 2016, 04:06:43 PM
by Paul_B