Author Topic: Too much current in sleep mode  (Read 365 times)

luisvalseca

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Too much current in sleep mode
« on: July 17, 2017, 05:20:25 AM »
Hi,
I am using  " NHD‐2.23‐12832UCB3 Graphic OLED Display Module ",  and it is configured as I2C, but in sleep mode, the current is about 750 uA and in the documentation of this module
must be between 3 and 15 uA. Could  someone help me to know why this happens.
Waiting for an answer, best regards

Luis Valscea


Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 341
  • Karma: 10
    • View Profile
Re: Too much current in sleep mode
« Reply #1 on: July 17, 2017, 08:24:41 AM »
Luis,

The current is being drawing by the DC/DC convertor.
It often draws more current when its not being powered.

luisvalseca

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Re: Too much current in sleep mode
« Reply #2 on: July 17, 2017, 09:38:23 AM »
Hi Saurabh_B,
I do not understand what you mind with "It often draws more current when its not being powered.", in my aplication, i need to sleep the microcontroller and spend the minimum possible current
while it is sleeping, but the display spend 750 uA after 0xAE command and i do not what to do , because that current is a lot when the microcontroller is sleeping.
What can i do to reduce this consumption?.

Luis Valseca



Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 341
  • Karma: 10
    • View Profile
Re: Too much current in sleep mode
« Reply #3 on: July 20, 2017, 04:58:04 PM »
Luis,

Unfortunately the datasheet needs to be updated to account for the DC/DC converter.
This does not shut down when the display enters sleep mode so the voltage is constantly being stepped up.

 

NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 1856
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD-0420H1Z-FL-GBW-33V3 pull-ups and pull-downs in 4 bit mode

Started by richardwrightBoard Character LCDs

Replies: 3
Views: 2863
Last post December 15, 2014, 05:12:27 PM
by Michael_L
NHD0420CW-A*3 tHREE LINE MODE, MIDDLE LINE DOUBLE HEIGHT

Started by wb2dybBoard OLEDs

Replies: 3
Views: 2983
Last post July 01, 2015, 09:49:46 AM
by Paul_B
NHD-2.4-240320CF-CSXN#-F works in 18 bits(262K colors) mode

Started by charlieBoard TFTs

Replies: 3
Views: 2049
Last post March 15, 2016, 10:39:50 AM
by Saurabh_B
Text orientation not changing with Extended Entry Mode Set Register

Started by tekknojoeBoard OLEDs

Replies: 5
Views: 1279
Last post January 27, 2017, 10:13:57 AM
by jmadsenee