Author Topic: SEPS525 is only 3.3V tolerant?  (Read 253 times)

bobgardner

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
SEPS525 is only 3.3V tolerant?
« on: August 30, 2017, 08:44:18 PM »
5V spi makes it unhappy? Just checking.

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Re: SEPS525 is only 3.3V tolerant?
« Reply #1 on: August 31, 2017, 07:59:02 AM »
Morning,

The NHD-1.69-160128UGC3 is 3.3V tolerant.
http://www.newhavendisplay.com/nhd169160128ugc3-p-5603.html

The NHD-1.69-160128ASC3 design includes built-in logic level shifting so you can use it with 3-5VDC power and logic levels  8)
http://www.newhavendisplay.com/nhd169160128asc3-p-9288.html

Hope this helps!


 

NHD-1.69-160128ASC3 with SEPS525 - MEMORY_WRITE_MODE not working

Started by Walter ValkemaBoard OLEDs

Replies: 2
Views: 1744
Last post May 10, 2016, 08:09:06 AM
by Paul_B
Smooth Scrolling on NHD-1.69-160128UGC3 with SEPS525

Started by pixelBoard OLEDs

Replies: 0
Views: 513
Last post July 06, 2017, 08:35:54 PM
by pixel