Newhaven Products > OLEDs

Characters Mirrored on NHD-0420CW Display

<< < (2/2)

garryg:
Not sure what else I can try?
I have tried the ENTRY SET MODE as suggested with results posted in previous post.
I have also tried the REV instruction with no success.
Not sure where else to look.  I have spent days on this problem.
Any help is much appreciated.  Thank you.

Saurabh_B:
Hello Garry,

Would it be possible to send me a picture of the back of the display as well?

I would like to see the date code and the bonding of the OLED Glass to the PCB. I would like to confirm that these are connected properly as well.
I haven't been able to replicate this issue.

Has this occurred on multiple displays or have you only been able to test 1?

Lou:
Saurabh_B,

I am also having similar issues with NHD-0216CW-AB3 -- tried 2 modules.

Date code is 01 17 NHD_0216CW_AB2.

Are the SHLC, or SHLS signals, from the US2066 controller, available anywhere on the module PCB?

Thanks.

Saurabh_B:
Unfortunately the pins are not available to the end user.

They do come out to the PCB on pins 5 & 6 of the ribbon connector that soldered onto the back of the display.

Lou:

--- Quote from: Saurabh_B on October 25, 2017, 04:00:17 PM ---They do come out to the PCB on pins 5 & 6 of the ribbon connector that soldered onto the back of the display.

--- End quote ---

Thank you.  That worked for me.

Navigation

[0] Message Index

[*] Previous page

Go to full version