Newhaven Products > TFTs

NHD-4.3RTP-SHIELD-N Pinout

(1/1)

skmfg:
Hi, I have an Arduino Mega 2560 and the NHD-4.3RTP-SHIELD-N display.
Instead of plugging the shield in, I would want to connect them via wires.

Which pins on the shield need to connect to the Arduino.

Thanks a lot!

Paul_B:
Morning,

The 'Pin Description' is listed in the NHD-4.3RTP-SHIELD-N datasheet ( see page 8 ).

http://www.newhavendisplay.com/specs/NHD-4.3RTP-SHIELD-N.pdf

Hope this helps  ;)

Navigation

[0] Message Index

Go to full version