Author Topic: Arduino FTDI_FT801 Library Documentation Issue  (Read 697 times)

stumpr84

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Arduino FTDI_FT801 Library Documentation Issue
« on: January 12, 2018, 01:46:50 PM »
Im not sure if I should post this issue here or on the FTDI website, but I figure someone here can help me.  I am just starting to learn how to program the arduino based NHD-43CTP-shield-N. I have notice that the code used in the examples that come with the FTDI_FT801 gethub library is quite different from the code in FT800 Programmer guide. For example, all code in the examples use FTImpl. before all commands but this is not documented in the programmer guide nor is it explained in the library.  For that mater from what I can see there is no documentation in the library that explains what is actually used vs what is documented in Programmer guide.  Another example of code that is used in the examples, but isnt mentioned in the programmers guide is the "FTImpl.Read()" command.  What is in the guide is the "rdxx()" command (xx is 8, 16 or 32 bit read).  There are numerous examples of that, more than I care to document here.  Is there any documentation out there that documents the actual command structure that is used in the examples?  I understand that what is used in the examples is based on what is documented in the guide, but when that code goes beyond what is in the guide and there is not documentation of what it does it is very difficult for beginners like me to learn.       

 

Eagle Library for NHD-C0216CZ-FSW-FBW-3V3 / NHD-C0216CZ-NSW-BBW-3V3

Started by mkrollBoard Character LCDs

Replies: 3
Views: 4548
Last post September 23, 2015, 10:11:30 AM
by Paul_B
Arduino demo code for running the NHD-0420DZW-AB5 OLED display via SPI

Started by llameroBoard OLEDs

Replies: 1
Views: 702
Last post May 21, 2018, 11:28:30 AM
by Ted_M
Wiring connectiond between NHD-1.69-160128ASC3 SSD1351 and Arduino Nano

Started by amitkumarsharma008Board OLEDs

Replies: 3
Views: 4572
Last post March 23, 2016, 03:38:11 PM
by Paul_B
NHD-0420D3Z-NSW-BBW-V3 i2c display and Arduino missing characters

Started by 0miker0Board Character LCDs

Replies: 0
Views: 2279
Last post July 06, 2017, 11:05:59 AM
by 0miker0
[STM32] [NHD-0420W-Ax3] [US2066] Problem Arduino to C

Started by arrgonBoard OLEDs

Replies: 1
Views: 425
Last post February 21, 2018, 10:13:12 AM
by Ted_M