Author Topic: NHD-2.23-12832UCB3-40956 display & SPI Bus -- Initialization Sequence  (Read 670 times)

BalajiNP

  • Jr. Member
  • **
  • Posts: 10
  • Karma: 0
    • View Profile
Hi,

This OLED display is connected in SPI mode. Need the initialization sequence for this SPI bus connections. Please provide this.

In I2C bus, this display is working fine. Can I use the same initialization sequence??

Please confirm.

-Thanks.

 

Blank Display on NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM

Started by SteveCBoard Character LCDs

Replies: 3
Views: 7820
Last post May 13, 2014, 12:04:36 AM
by SteveC
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 9540
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 6642
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 9
Views: 15231
Last post July 10, 2014, 08:46:06 AM
by Michael_L
NHD-0420DZW-AG5 - Display "sometimes" shows only 2 lines

Started by stylonurusBoard OLEDs

Replies: 5
Views: 9059
Last post June 18, 2014, 10:09:49 AM
by Michael_L