Newhaven Products > OLEDs



Hi there ,
We have recently purchased NHD-3.12-25664UMB3 OLED and are trying to interface it with Nvidia TX2 in SPI mode. So we need confirmation regarding the connection of Pin Number 19,20,21,22 {multi-font IC's } is it mandatory to use those pins ?  OR they can be neglected like NC { No connection} OR can we connect those pins to ground ? . Because as of now we are not using Multi-font feature  . Please confirm it at the earliest .

Thanks & Regards

The Multi-font IC can be left open and unused by floating pins 19,20,21 and 22.  The display itself will run independent from the onboard Multi-font IC.

Thanks for the reply Ted_M :) .


[0] Message Index

Go to full version