Newhaven Products > Graphic LCDs

Any issue powering the NHD-C12864WO-B1TFH#-M from 3.3V?


the datasheet says it can be powered between 2.7V and 3.3V:

The microcontroller is powered from 3.3V, I would like to use a single power source for both.

Since I want to use it in an always-on application, I would like to know if there are potential issues (or something I should be aware of) using 3.3V power, or if 3.0V is recommended and I'll have to use a voltage translator.


The NHD-C12864WO-B1TFH#-M display can be powered safely by 3.3v so a single power source can be used for your application.


[0] Message Index

Go to full version