Author Topic: NHD-7.0-800480EF-34 Controller Board vs NHD-4.3-480272MF-34 Controller Board  (Read 4937 times)

EdwinS

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Hello,
I will buy a NHD-7.0-800480EF-ATXL#-CTP screen with a controller board. From another project I have a controller board (NHD-4.3-480272MF-34 Controller Board). So I compared this board with the 7.0 inch controller board an the pin out from both are the same. Also the used chip is the same. Can I use the 4.3 inch controller board for my 7 inch display? anyone who has tried this?

Edwin

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 357
  • Karma: 34
    • View Profile
Yes, you can use that board with the 7.0" display since the controller IC is the same, and the pinout is also the same.  However, the difference will be seen in the backlight.  The 7.0" display has different backlight requirements, and the backlight driver circuits between the 4.3" and 7.0" controller boards are different.  The display will still work, but the backlight will not be as bright as it should.

 

NHD-7.0-800480EF-ASXV#-CTP - "Touch" stopped working on part of LCD

Started by coran21Board TFTs

Replies: 1
Views: 1085
Last post February 19, 2019, 11:20:53 AM
by Sergio_M
NHD-7.0-800480EF-ATXV-CTP step/iges file request

Started by lakshminarayananBoard TFTs

Replies: 1
Views: 3897
Last post July 24, 2015, 11:25:39 AM
by Paul_B
MOVED: working with nhd-7.0-800480ef-asxv-t with buildroot framebuffer

Started by Saurabh_BBoard Graphic LCDs

Replies: 0
Views: 2574
Last post November 16, 2017, 08:14:59 AM
by Saurabh_B
MOVED: Differences between NHD-5.0-800480TF-ATXL and NHD-7.0-800480EF-ASXN

Started by Alee_SBoard Graphic LCDs

Replies: 0
Views: 227
Last post March 05, 2019, 08:09:59 AM
by Alee_S
NHD-7.0-800480EF-ATXV#-CTP touch screen details

Started by lakshminarayananBoard TFTs

Replies: 1
Views: 4577
Last post June 24, 2014, 10:33:38 AM
by Michael_L