Author Topic: Power Up Sequence for OLED  (Read 330 times)

LarryQW

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Power Up Sequence for OLED
« on: August 03, 2019, 01:53:39 AM »
I'm using the NHD-0.6-6464G Color OLED. I'm driving VCC at 12V and VDD at 3.3V.

To save power, I will turn off the system, but the 12V will remain powered. If I put the display in sleep mode via the SPI command will the power go to the rated 10 uA?

What if VDD goes to zero as I power down? Will the display remain in sleep mode? Do I need to switch the 12V VCC supply as well, and if so, in what sequence for power up and power down?

Alee_S

  • Administrator
  • Jr. Member
  • *****
  • Posts: 53
  • Karma: 0
    • View Profile
Re: Power Up Sequence for OLED
« Reply #1 on: August 06, 2019, 12:20:55 PM »
This topic is currently being resolved via e-mail.

 

16x2 OLED NHD-0216KZW-AY5 Intermittent, and perament vertical dots Brightness

Started by BenB2013Board OLEDs

Replies: 4
Views: 10281
Last post October 23, 2014, 04:55:27 PM
by BenB2013
Display current of 128x64 yellow OLED (2.7-12864UMY3) really 175mA?

Started by flywheelBoard OLEDs

Replies: 1
Views: 8159
Last post June 30, 2014, 04:48:12 PM
by Michael_L
Wiring between NHD-1.5128128ASC3ND OLED Display and NHDev 2.10 Development Board

Started by vcp88Board OLEDs

Replies: 1
Views: 6885
Last post June 07, 2016, 08:20:38 AM
by Saurabh_B
NHD-0420DZW-AG5 OLED character module--Displaying junk data

Started by control3Board OLEDs

Replies: 2
Views: 5993
Last post December 11, 2016, 11:19:54 PM
by control3
Korean Hex GB code for OLED multi font display NHD-2.7-12864UMY3

Started by newhavenuserBoard OLEDs

Replies: 0
Views: 5490
Last post May 05, 2017, 01:17:45 PM
by newhavenuser