Author Topic: "Ghosting" artifact on NHD-1.69-160128ASC3  (Read 1283 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
"Ghosting" artifact on NHD-1.69-160128ASC3
« on: May 17, 2018, 04:43:23 AM »
Hi Newhaven Display,

I recently purchased your NHD-1.69-160128ASC3 OLED display, which is very nice to work with.

However I expreience a ghosting artifact/problem, which is best described bv looking at the attached image. The horizontal grey bar is drawn as one solid box, but when lighting up pixels brightly next to it is is dimmed in the coresponding rows. Is this normal behaviour or can it be fixed?

Note that the display is rotated 90 degrees. The diagonal lines is just created by my camera and should not be taken into account.


  • Administrator
  • Jr. Member
  • *****
  • Posts: 15
  • Karma: 0
    • View Profile
Re: "Ghosting" artifact on NHD-1.69-160128ASC3
« Reply #1 on: June 06, 2018, 05:00:24 PM »
What you are seeing is normal behavior, to a certain extant. This is a passive matrix OLED display and when drawing certain images / patterns on the screen you can see a difference in brightness between some pixels depending on their location on the screen. While this cannot be completely avoided, you can try optimizing the pixels brightness in your software.


Wiring connectiond between NHD-1.69-160128ASC3 SSD1351 and Arduino Nano

Started by amitkumarsharma008Board OLEDs

Replies: 3
Views: 7555
Last post March 23, 2016, 03:38:11 PM
by Paul_B
NHD-1.69-160128ASC3 with SEPS525 - MEMORY_WRITE_MODE not working

Started by Walter ValkemaBoard OLEDs

Replies: 2
Views: 3667
Last post May 10, 2016, 08:09:06 AM
by Paul_B
7.0" TFTs with capacitive Touch and 8080 interface availability?

Started by gdoraisaBoard TFTs

Replies: 1
Views: 5476
Last post June 30, 2016, 07:54:11 AM
by Saurabh_B
How do I stack a DAC shield between a 4.3" LCD Display and an Arduino Mega 2560?

Started by wa6htpBoard Customer Projects

Replies: 1
Views: 2322
Last post September 19, 2018, 09:14:45 AM
by Ted_M
16-bit controller Board (SSD1963) for 5.7" QVGA TFT display

Started by erpsBoard Evaluation Tools

Replies: 1
Views: 7402
Last post September 17, 2015, 02:25:46 PM
by Saurabh_B