Author Topic: NHD-0420DZW-AY5 - RAM auto-increments but cursor moves to left  (Read 536 times)

gbgb

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
I have an odd behavior, which I can find no mention to in the manual
Although during initialization I set the entry mode to 06 (auto-increment, no display shift) what I get is that the ram indeed auto increments, but for some reason, instead of shifting the cursor to the right it is shifted to the left.
for example, i try to print ABCD
if I set the ram address as required to the beginning of the row I get only the A printed
If I set the ram address to somewhere in the middle of the row what I get is DCBA with the cursor blinking to the left of the D.

This type of behavior is not mentioned at all in the manual - according to the manual if set to auto-increment the cursor moves to the right and if set to auto-decrement it moves to the left, but no where is mentioned the combination as I observe

What am I missing? Is there another command during initialization that may cause it (I followed the initialization sequence as in the manual and I work in 8 bits mode)

Sergio_M

  • Administrator
  • Jr. Member
  • *****
  • Posts: 10
  • Karma: 0
    • View Profile
Re: NHD-0420DZW-AY5 - RAM auto-increments but cursor moves to left
« Reply #1 on: June 06, 2018, 04:56:04 PM »
There is another command "Cursor/Display Shift" that can change the cursor position. Are you using this command? if so, what value are you sending?

 

Questions regarding NHD‐0220DZW‐AY5 & NHD‐0420DZW‐AY5

Started by tseyfarthBoard OLEDs

Replies: 3
Views: 4894
Last post August 20, 2015, 09:51:26 AM
by Saurabh_B
NHD‐0420DZW‐AB5 Lines

Started by RickJBoard OLEDs

Replies: 1
Views: 3705
Last post January 09, 2015, 04:18:32 PM
by Michael_L
NHD‐0420DZW‐AY5 SPI Interface

Started by vinaykBoard OLEDs

Replies: 0
Views: 3601
Last post October 26, 2015, 05:13:10 AM
by vinayk
NHD-0420DZW-AG5 - Display "sometimes" shows only 2 lines

Started by stylonurusBoard OLEDs

Replies: 5
Views: 9305
Last post June 18, 2014, 10:09:49 AM
by Michael_L
NHD‐0420DZW‐AY5 - Power consumption and luminance difference 3.3V/5.0V?

Started by MonkeywrenchBoard OLEDs

Replies: 0
Views: 2897
Last post November 20, 2015, 06:40:16 PM
by Monkeywrench