Author Topic: NHD-3.5-320240FT-CSXN-T change to portrait  (Read 906 times)

Spyy

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-3.5-320240FT-CSXN-T change to portrait
« on: December 31, 2018, 06:42:06 AM »
Hi,

I have the above mentioned display and i want to change the resolution to portrait mode. It has 320*240 and i changed the following parameters:
REG_ROTATE from 0 to 3
Now it is portrait but i can not see the entire screen. I tried:
REG_HSIZE from 320 to 240
REG_VSIZE from 240 to 320
After doing this the screen stays black. So...are there other parameters that i have to change to get it into portrait ?


Thank you for your help

Torsten

 

Filling with blue yields flashing white screen (NHD-2.4-240320CF-CSXN#-F)

Started by asfarleyBoard TFTs

Replies: 2
Views: 2114
Last post December 11, 2018, 07:17:54 AM
by Paul_B
NHD-2.4-240320CF-CSXN#-F works in 18 bits(262K colors) mode

Started by charlieBoard TFTs

Replies: 3
Views: 6053
Last post March 15, 2016, 10:39:50 AM
by Saurabh_B
st7789s controller serial mode for NHD-2.4-240320CF-CSXN#-F

Started by greyscaleBoard TFTs

Replies: 2
Views: 4962
Last post March 14, 2016, 11:49:01 AM
by charlie
NHDev Development Board with NHD-2.4-240320CF-CSXN#-F

Started by pbattenBoard Evaluation Tools

Replies: 5
Views: 6395
Last post June 28, 2016, 05:00:52 PM
by Saurabh_B
Voltages and Power_Control registers with NHD-1.8-128160EF-CSXN#-F

Started by qfsasmBoard TFTs

Replies: 1
Views: 1390
Last post February 19, 2019, 11:23:11 AM
by Sergio_M