Author Topic: Our 1st line of SLIM character OLEDs have arrived.  (Read 4258 times)

Bridgette_E

  • Administrator
  • Jr. Member
  • *****
  • Posts: 19
  • Karma: 1
    • View Profile
Our 1st line of SLIM character OLEDs have arrived.
« on: December 15, 2014, 11:13:11 AM »



New Slim OLEDs
  Vivid. Organic. Affordable.

Offering half the thickness and twice the contrast of standard OLED module displays, these new Slim OLEDs are
a more affordable OLED option for any industry. Available in 2x16, 2x20 and 4x20 character formats, the new slim
OLEDs add additional color options to the OLED display line. Red, green, blue, and yellow color options are offered
in each display size. These displays come packaged as complete modules that include all required logic at only a
5mm thickness. With 3 built-in font tables, 10,000:1 contrast ratio, 10ųsec response time, and built-in screen savers,
these new displays will offer any industry an upgrade to their current monochromatic character application.


Features
   5mm thin
   2x16, 2x20, 4x20 character formats
   >160 viewing angle
   Double height characters
   Red, blue, green and yellow color options
   10,000:1 contrast ratio
   10ųsec response time
   Built-in US2066 controller
   Modules include all necessary logic
   SPI, I2C and parallel interfaces
   -40C ~ +85C operating temp.
   Low power: 2.4~3.6VDD
   RoHS compliant


Part Number Listing:
Colors             2x16 Sizes2x20 Sizes4x20 Sizes
BLUE:    NHD-0216CW-AB3         NHD-0220CW-AB3         NHD-0420CW-AB3         
GREEN:       NHD-0216CW-AG3         NHD-0220CW-AG3         NHD-0420CW-AG3         
RED:            NHD-0216CW-AR3           NHD-0220CW-AR3          NHD-0420CW-AR3         
YELLOW:      NHD-0216CW-AY3           NHD-0220CW-AY3          NHD-0420CW-AY3         


Click here for pricing and purchasing: http://bit.ly/BuySlims
Learn more in our Product Knowledge Center: http://bit.ly/PKC-slim

wb2dyb

  • Jr. Member
  • **
  • Posts: 26
  • Karma: 0
    • View Profile
Re: Our 1st line of SLIM character OLEDs have arrived.
« Reply #1 on: February 08, 2015, 02:11:20 AM »
Very nice to see these. I've been needing this for a project that maybe I can finally complete. I used a Noritake Character VFD but the 36 volts and glass are a problem as is the size, about 4mm too wide. I got your last two NHD-0420Z-RN-GBW devices and while a slight bit too narrow, would have been fine, if I could get more. However, I just found last week that you took the displays and married them to an interface board. This is great as the redesign on the VFD was to use a 2.8" OLED graphic display using U8Glib, which while it worked, the overhead to run the graphics stuff made the display sluggish. I only need a 4 line character display. And it has to fit 93mmX34mm. The new NHD-0420CW series is ideal. Except I can't make it work, but I'll post that in the forum. I either got two bad ones from Mouser or did something incorrect on interface, or (most likely) can't substitute what looked like drivers that were identical. Your site and the world is extremely thin on info for this unit and the driver, and a sample Arduino code. I work it up on Arduino then eventually upload code to an Atmel chip.

George Csahanin
« Last Edit: February 12, 2015, 03:11:36 PM by Atif_K »

Bridgette_E

  • Administrator
  • Jr. Member
  • *****
  • Posts: 19
  • Karma: 1
    • View Profile
Re: Our 1st line of SLIM character OLEDs have arrived.
« Reply #2 on: February 12, 2015, 03:32:56 PM »
Glad you like them! I found additional feedback to your post in a different thread, so I thought I'd share the link:
http://www.newhavendisplay.com/NHD_forum/index.php/topic,879.msg1722.html#msg1722

 

Character LCD NHD‐0220D3Z‐NSW‐BBW‐V3 not receiving correct characters

Started by davekBoard Character LCDs

Replies: 1
Views: 2120
Last post March 25, 2016, 05:23:05 PM
by Saurabh_B
NHD-0420DZW-AG5 OLED character module--Displaying junk data

Started by control3Board OLEDs

Replies: 2
Views: 988
Last post December 11, 2016, 11:19:54 PM
by control3
Controlling 1x16 character display NHD-0116GZ.

Started by icaganBoard Character LCDs

Replies: 5
Views: 4436
Last post May 21, 2014, 03:31:37 PM
by Michael_L
OLED Character display - Some commands don't work

Started by wedgeBoard Character LCDs

Replies: 1
Views: 2977
Last post July 08, 2014, 09:29:43 AM
by Michael_L
Understanding the Vih specification driving a 5V character LCD with 3.3V logic

Started by PJoyceBoard Character LCDs

Replies: 8
Views: 5014
Last post August 17, 2015, 07:55:30 AM
by Saurabh_B