Author Topic: OLED Streaking  (Read 2069 times)

tmig

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
OLED Streaking
« on: January 07, 2015, 03:42:35 PM »
Hello

I am having similar streaking problems with the NHD-2.7 OLED display as a previous poster had in august. There did not seem to be a specific resolution declared within the topic. Was there a specific solution?

I am using the same code for the NHD-2.7 OLED I used previously with an OSD display with no changes. It is the same Winbond display you seem to use with the same controller, but in that case we were required to supply the 12V for the display. Your display is more convenient, but I need to get this streaking fixed before we can replace the OSD. Do you have example code to drive your display with both the header file and the main code, available for testing? SPI interface preferred, but either interface is acceptable, I will modify it as needed. In your example code I could only find a .txt (the .c file)  file without an associated .h header file.

Thanks

Tmig

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: OLED Streaking
« Reply #1 on: January 09, 2015, 04:15:22 PM »
I'm sure you are probably referring to this post:
http://www.newhavendisplay.com/NHD_forum/index.php/topic,94.0.html

If not, please look through it because various commands that affect this are mentioned, along with other suggestions such as increasing refresh rate or changing the offset.  In that post I have the code posted, which does not have an associated header file.  All defines/prototypes are within that text file.  The customer that posted that never posted after I shared all of that information, so I can only assume he re-checked all of his code and hardware vs what I posted and got the display working correctly.

 

16x2 OLED NHD-0216KZW-AY5 Intermittent, and perament vertical dots Brightness

Started by BenB2013Board OLEDs

Replies: 4
Views: 4660
Last post October 23, 2014, 04:55:27 PM
by BenB2013
Display current of 128x64 yellow OLED (2.7-12864UMY3) really 175mA?

Started by flywheelBoard OLEDs

Replies: 1
Views: 3396
Last post June 30, 2014, 04:48:12 PM
by Michael_L
Wiring between NHD-1.5128128ASC3ND OLED Display and NHDev 2.10 Development Board

Started by vcp88Board OLEDs

Replies: 1
Views: 2081
Last post June 07, 2016, 08:20:38 AM
by Saurabh_B
NHD-0420DZW-AG5 OLED character module--Displaying junk data

Started by control3Board OLEDs

Replies: 2
Views: 1129
Last post December 11, 2016, 11:19:54 PM
by control3
Korean Hex GB code for OLED multi font display NHD-2.7-12864UMY3

Started by newhavenuserBoard OLEDs

Replies: 0
Views: 663
Last post May 05, 2017, 01:17:45 PM
by newhavenuser