Author Topic: How do you set the SED1963 to 8080 mode?  (Read 1890 times)

dfansler

  • Jr. Member
  • **
  • Posts: 26
  • Karma: 0
    • View Profile
How do you set the SED1963 to 8080 mode?
« on: January 11, 2015, 05:54:01 PM »
The SED1963 data sheet you set the "conf" line to define if the SED1963 is in the 8080 or 6800 mode.  In that the NHD‐7.0‐800480WF‐CTXI#‐T does not have the "conf" line, how do you tell the SED1963 which mode to use?
Kind regards,
David

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: How do you set the SED1963 to 8080 mode?
« Reply #1 on: January 12, 2015, 08:44:00 AM »
You are correct, that signal is not available to the user.  The NHD‐7.0‐800480WF‐CTXI#‐T is configured for 8080 mode.

 

NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 2005
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD-0420H1Z-FL-GBW-33V3 pull-ups and pull-downs in 4 bit mode

Started by richardwrightBoard Character LCDs

Replies: 3
Views: 3101
Last post December 15, 2014, 05:12:27 PM
by Michael_L
NHD0420CW-A*3 tHREE LINE MODE, MIDDLE LINE DOUBLE HEIGHT

Started by wb2dybBoard OLEDs

Replies: 3
Views: 3188
Last post July 01, 2015, 09:49:46 AM
by Paul_B
NHD-2.4-240320CF-CSXN#-F works in 18 bits(262K colors) mode

Started by charlieBoard TFTs

Replies: 3
Views: 2240
Last post March 15, 2016, 10:39:50 AM
by Saurabh_B
Text orientation not changing with Extended Entry Mode Set Register

Started by tekknojoeBoard OLEDs

Replies: 5
Views: 1469
Last post January 27, 2017, 10:13:57 AM
by jmadsenee