Author Topic: ALL DISPLAYS USING FFC CABLE AND CONNECTORS  (Read 176 times)

JIMCHRIS69

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
ALL DISPLAYS USING FFC CABLE AND CONNECTORS
« on: June 25, 2018, 03:28:27 PM »
For all you people having trouble getting your graphics display to work, an absolutely huge problem is shorts and open circuits on the FFC, 0.5 mm pitch, ribbon connectors. I finally bought a breakout board for the particular connector on my project and was thus able to check for opens and shorts on the ribbon cable connector. Without a breakout board the job was impossible.

Ted_M

  • Administrator
  • Jr. Member
  • *****
  • Posts: 37
  • Karma: 2
    • View Profile
Re: ALL DISPLAYS USING FFC CABLE AND CONNECTORS
« Reply #1 on: June 26, 2018, 09:02:24 AM »
Thanks Jim!

Please see our complete line of breakout and adapter boards for FFC ribbon connectors. We also have various pitch SMT and thru-hole adapter boards:

http://www.newhavendisplay.com/development-tools-adapters-and-breakouts-c-979_982.html

Regards,

 

Backlight brightness with TFT displays (5" and 7")

Started by dsheroBoard TFTs

Replies: 3
Views: 4772
Last post July 21, 2015, 07:19:42 AM
by Michael_L
Calculation of Font Addresses Multi‐Font Displays Help!

Started by BluesboyBoard OLEDs

Replies: 6
Views: 5661
Last post September 11, 2015, 10:54:16 AM
by Saurabh_B
NHD-C12864A1Z not listed in NHDev Supported Displays List

Started by JimLBoard Evaluation Tools

Replies: 1
Views: 2345
Last post April 19, 2017, 05:34:28 PM
by JimL
Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?

Started by bluemountainBoard OLEDs

Replies: 2
Views: 3406
Last post January 14, 2015, 12:19:16 PM
by bluemountain
Test mode for NHD-0420CW-xxx displays?

Started by LoyalServantBoard OLEDs

Replies: 8
Views: 5833
Last post May 06, 2016, 12:54:49 PM
by Saurabh_B