« previous next »
Pages: [1]

Author Topic: Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?  (Read 4471 times)

bluemountain

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?
« on: January 13, 2015, 05:43:10 PM »
We're looking to use the NHD-0216CW-AB3 display due to it's improved operating range (low-temp) versus LCD displays we now use.  Our current design provides 3.3V for the display.  The NHD-0216CW-AB3 is rated at 2.8V recommended with 3.6V being the max voltage when not using the on-board regulator.  Is it safe provide 3.3V power/logic for these displays long-term?
Logged

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 357
  • Karma: 34
    • View Profile
Re: Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?
« Reply #1 on: January 14, 2015, 10:04:52 AM »
Yes, it is absolutely safe to run these displays at 3.3V long-term.
Logged

bluemountain

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?
« Reply #2 on: January 14, 2015, 12:19:16 PM »
Thanks for the prompt replay Michael_L.  This display looks ideal to replace the one we're currently using so that is indeed good news.
Logged
Pages: [1]
« previous next »
 

Backlight brightness with TFT displays (5" and 7")

Started by dsheroBoard TFTs

 Replies: 3
Views: 6084 		Last post July 21, 2015, 07:19:42 AM
by Michael_L
NHD-0216CW-AY3 8-bit Parallel 8080, Text on Display Issue

Started by forteyBoard OLEDs

 Replies: 14
Views: 12380 		Last post March 09, 2015, 02:23:51 PM
by Retheesh_M
Blinking Double Height Font NHD-0216CW

Started by MatthewKerrBoard OLEDs

 Replies: 1
Views: 396 		Last post November 28, 2018, 12:51:53 PM
by Alee_S
Calculation of Font Addresses Multi‐Font Displays Help!

Started by BluesboyBoard OLEDs

 Replies: 6
Views: 7334 		Last post September 11, 2015, 10:54:16 AM
by Saurabh_B
NHD-0216CW-AB3 dots underneath characters

Started by cprobertBoard OLEDs

 Replies: 0
Views: 2767 		Last post November 19, 2015, 10:26:39 AM
by cprobert