Author Topic: OLED speed  (Read 2071 times)

bbragg

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
OLED speed
« on: January 10, 2015, 11:48:51 AM »
I was looking at the specs for NHD-0216KZW-AB5 and I noticed that the execution time says 600uS for single byte operations.  Is that really the new rate given that the old LCD based devices ran these ops at 38uS when clocked at the very common 270KHz?  Are the display processors on these OLEDs really 15 times slower?

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: OLED speed
« Reply #1 on: January 12, 2015, 08:44:17 AM »
The execution times listed in the datasheet are correct.  Please also note that these times are the max execution times, and are not representative of the average.  A faster way would be to use a busy flag check after a command is sent instead of using a 600us delay.
« Last Edit: January 12, 2015, 03:58:08 PM by Michael_L »

 

16x2 OLED NHD-0216KZW-AY5 Intermittent, and perament vertical dots Brightness

Started by BenB2013Board OLEDs

Replies: 4
Views: 4660
Last post October 23, 2014, 04:55:27 PM
by BenB2013
Display current of 128x64 yellow OLED (2.7-12864UMY3) really 175mA?

Started by flywheelBoard OLEDs

Replies: 1
Views: 3396
Last post June 30, 2014, 04:48:12 PM
by Michael_L
Wiring between NHD-1.5128128ASC3ND OLED Display and NHDev 2.10 Development Board

Started by vcp88Board OLEDs

Replies: 1
Views: 2081
Last post June 07, 2016, 08:20:38 AM
by Saurabh_B
NHD-0420DZW-AG5 OLED character module--Displaying junk data

Started by control3Board OLEDs

Replies: 2
Views: 1128
Last post December 11, 2016, 11:19:54 PM
by control3
Korean Hex GB code for OLED multi font display NHD-2.7-12864UMY3

Started by newhavenuserBoard OLEDs

Replies: 0
Views: 663
Last post May 05, 2017, 01:17:45 PM
by newhavenuser