Author Topic: NHD-2.23-12832UCB3 memory display  (Read 2038 times)

movesystems

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-2.23-12832UCB3 memory display
« on: January 21, 2015, 04:24:01 PM »
Hi guys, after purchasing the 128x32UCB3 and setting it up with assembler code I see that the data memory is setup vertically and not horizontally like any other normal LCD graphic module.
I can write data to the screen horizontally from left to right by setting Memory Addressing Mode command 20h to 0x00h. The data is positioned horizontally on the screen but is positioned vertically in memory.

How do I get it to display data horizontally?

Pete
 

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHD-2.23-12832UCB3 memory display
« Reply #1 on: January 23, 2015, 09:48:21 AM »
For this information, please refer to pages 40/41 of the controller's datasheet for that display, here: http://www.newhavendisplay.com/app_notes/SSD1305.pdf

 

Blank Display on NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM

Started by SteveCBoard Character LCDs

Replies: 3
Views: 4559
Last post May 13, 2014, 12:04:36 AM
by SteveC
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 5693
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3397
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 9
Views: 8804
Last post July 10, 2014, 08:46:06 AM
by Michael_L
NHD-0420DZW-AG5 - Display "sometimes" shows only 2 lines

Started by stylonurusBoard OLEDs

Replies: 5
Views: 5569
Last post June 18, 2014, 10:09:49 AM
by Michael_L