Author Topic: NHD-3.12 SSD1322 serial synchronization reset  (Read 275 times)

atdown

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-3.12 SSD1322 serial synchronization reset
« on: August 15, 2018, 10:01:50 AM »
Good morning, quick question as my first post.  I'm working with a NHD-3.12 and my embedded system power rails bounce for several mS when i turn the system on.  I've noticed this causes varied and random errors on my OLED.  I was wondering if the serial synchronization of the controller is reset every CS edge, or if only the RESET line can reset the serial sync.  I think that the startup noise clocks in a few bits, then when i go to transmit a command what i think is bit-0 isn't anymore.

Thanks!
-Alexander

 

st7789s controller serial mode for NHD-2.4-240320CF-CSXN#-F

Started by greyscaleBoard TFTs

Replies: 2
Views: 3433
Last post March 14, 2016, 11:49:01 AM
by charlie
NHD-C0216CZ-FSW-FBW Serial Interface RS line question

Started by joestaudtBoard Character LCDs

Replies: 4
Views: 5729
Last post May 11, 2015, 09:34:29 AM
by Michael_L
NHD-042ODZW-AY5 Jumpers for Serial Interface

Started by PCookBoard OLEDs

Replies: 5
Views: 4195
Last post February 24, 2017, 02:31:01 AM
by SkipSky
Parallax Bs2P serial LCD code

Started by chrisdloveBoard Customer Projects

Replies: 2
Views: 7121
Last post April 29, 2015, 08:06:15 AM
by Bridgette_E
NHD-0216K3Z-FL-GBW-V3-C serial interface not working

Started by BobecBoard Character LCDs

Replies: 1
Views: 3150
Last post July 14, 2015, 08:49:25 AM
by Saurabh_B