Author Topic: 2.4" TFT 8 bit interface  (Read 2364 times)

mauriciocn

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
2.4" TFT 8 bit interface
« on: February 26, 2015, 02:00:10 PM »
I am starting a new project using a 2.4" TFT - first time with that kind of display, so, sorry if it is a dumb question.
By the datasheet of NHD-2.4-240320CF-CTXI#-FT (st7789s controller) I should conect the MPU 8 bit bus to DB8-DB15 of the display, but the st7789s datasheet say I should use DB0-DB7.
The same inconsistense exist in NHD-2.4-240320SF-CTXL#-FTN1 (using a ili8241 controller):
display datasheet:   MPU DB0-DB7<->TFT DB8-DB15
controler datasheet: MPU DB0-DB7<->TFT DB0-DB7
If someone could give some information I will be very gratefull.

Retheesh_M

  • Guest
Re: 2.4" TFT 8 bit interface
« Reply #1 on: February 26, 2015, 04:58:42 PM »
Our displays are configured for I/F II mode.  When using an 8-bit interface you need to use the upper 8 bits of the 16-bit data bus.  Please take a look at page 32 of the ST7789S controller datasheet and page 10 of the ILI9341 controller datasheet under the MCU interface mode description.  Also we recommend that you tie the unused DB0-DB7 pins of the display to ground for 8-bit interface.

mauriciocn

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: 2.4" TFT 8 bit interface
« Reply #2 on: February 27, 2015, 06:44:52 AM »
Thanks! :)

 

NHD‐0420CW‐AB3 I2C Interface

Started by andersonpdBoard OLEDs

Replies: 1
Views: 2630
Last post January 23, 2015, 10:00:06 AM
by Michael_L
NHD‐0420DZW‐AY5 SPI Interface

Started by vinaykBoard OLEDs

Replies: 0
Views: 2044
Last post October 26, 2015, 05:13:10 AM
by vinayk
NHD‐3.12‐25664UMB3 3 or 4 wire interface

Started by cliffgBoard OLEDs

Replies: 1
Views: 2480
Last post February 13, 2015, 04:43:21 PM
by Michael_L
NHD-2.4-240320CF-CTXI#-FT (ST7789S controller) and STM32F4 FSMC LCD Interface

Started by deshayesBoard TFTs

Replies: 1
Views: 2662
Last post March 17, 2016, 06:25:18 PM
by fahad
A graphical user interface for Atmels SAM4S Xplained Pro.

Started by PaulVdBerghBoard Customer Projects

Replies: 1
Views: 3221
Last post April 01, 2015, 01:28:00 PM
by Bridgette_E