Author Topic: Viewing Angle 6:00  (Read 1874 times)

B3-Man

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Viewing Angle 6:00
« on: March 17, 2015, 08:05:26 AM »
Hello!

We are planning a design with the NHD‐2.4‐240320SF‐CTXL#‐FTN1, which is a 6:00-type.
In the mechanical Drawing (Datasheet page 3), it seems the arrows showing the optimal viewing direction are contradictory: the view in the upper-left corner shows an arrow pointing "up", while the next view (side-view) shows an arrow pointing "down". I would expect the arrow in the side-view to be correct. Is that true?

Regards,
  Martin

Retheesh_M

  • Guest
Re: Viewing Angle 6:00
« Reply #1 on: March 17, 2015, 04:16:56 PM »
The arrow shown in the side view was incorrect.  Since the display has a 6:00 view, the arrow should be pointing up.  We have updated the specification sheet accordingly and the latest version will be available online tomorrow.

B3-Man

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: Viewing Angle 6:00
« Reply #2 on: March 20, 2015, 08:07:03 AM »
Thanks for the quick reply!

So I could start my layout now... (if it wasn't friday and I worked already lots of overtime this month :-) )

  Martin

 

MOVED: 2.4" LCD module viewing angle

Started by Saurabh_BBoard Graphic LCDs

Replies: 0
Views: 1969
Last post January 25, 2016, 08:19:32 AM
by Saurabh_B
NHD-7.0-800480EF-ATXV#-CTP vertical viewing angle

Started by LarryGBoard TFTs

Replies: 1
Views: 1772
Last post May 18, 2016, 12:58:40 PM
by Paul_B
2.4" LCD module viewing angle

Started by greyscaleBoard TFTs

Replies: 1
Views: 1535
Last post January 25, 2016, 11:21:09 AM
by Saurabh_B