Author Topic: NHD-C12832A1Z-FSW-FBW-3V3 1.5mm header  (Read 2602 times)

jaredmny

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-C12832A1Z-FSW-FBW-3V3 1.5mm header
« on: March 17, 2015, 11:39:56 PM »
Hello,
I recently purchased the display mentioned above and found that it has a 1.5mm spaced header. Do you have a recommended part number for a mating socket? Alternatively, do you have an adapter / breakout board available for prototype development work? 
Thanks.

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Re: NHD-C12832A1Z-FSW-FBW-3V3 1.5mm header
« Reply #1 on: March 18, 2015, 07:54:55 AM »
Hello,

Thanks for reaching out, NHD-C12832A1Z-FSW-FBW-3V3 is meant to be soldered directly to a pcb. We sell a 17 pin Thru-hole to 2x4 Conversion board for NHD-C12832A1Z displays. All necessary capacitors for the voltage booster-circuit and current limiting resistor are included. Please see the link below  8)

http://www.newhavendisplay.com/nhdpcb12832a1z-p-3569.html

Hope this helps!

bkulpa

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Re: NHD-C12832A1Z-FSW-FBW-3V3 1.5mm header
« Reply #2 on: April 05, 2016, 02:22:31 PM »
We have been using this display for the past three to four years and have noticed that after this time the display back light begins to dim.  Is this expected behavior?  Is there anything we can do to make the back light brighter?

 

M0220SD-202SDAR1-S - how to connect to internal morherboard header?

Started by bobahBoard Vacuum Fluorescent Displays

Replies: 4
Views: 3455
Last post June 23, 2015, 01:48:18 AM
by bobah
NHD-C12832A1Z-FS(RGB)-FBW-3V Backlight Color Control

Started by dglassBoard Graphic LCDs

Replies: 3
Views: 3226
Last post November 18, 2014, 08:42:52 AM
by Michael_L
SPI connection to NHD-C12832A1Z-FSR-FBW-3V3

Started by raspdroidBoard Graphic LCDs

Replies: 1
Views: 2377
Last post January 29, 2016, 09:29:52 AM
by Saurabh_B